Dec 26, 2010

make your own ice sling

Problem: You have a separated shoulder, requiring ice every few hours. But you can't just hold a Ziploc bag up there for twenty minutes at a time; after all, you have books to read, or topics to blog about.

Solution: Make your own ice sling.

Materials: Ice, quart-sized freezer bag, duct tape, neck tie.
Painkillers and holiday arrangement not included.
Steps:
1. Take an empty freezer bag and press it flat on a countertop. Set aside.

2. Cut 2 pieces of duct tape, in roughly 1.25" (3.2 cm) and 3.25" (8.3 cm) lengths.

3. Carefully place a shorter piece in the middle of a longer piece, adhesive-to-adhesive. (This is for making a "belt loop," with an inch of adhesive on both ends.) Affix to the front of the bag, about 1 inch from the edge.
The ice sling in action.  Note its stylish comfort.
4. Repeat steps 2 and 3, affixing the second loop near the other edge, completing the belt loop.

5. If you want, you may reinforce your loop by adding a strip of duct tape above and below (see illustration).

6. Thread the necktie through the loops, fill the bag with ice, place it tape-side down on your shoulder, and tie the tie around your neck. (Its's probably best to have a friend assist you at this juncture; if unavailable, tie the knot loosely before placing the ice, and adjust using a mirror.)

7. Ice your shoulder as recommended by a physician.

8. Blog about it.

3 comments:

Ena Ganguly said...

I am a fan of your work! ;]

Anonymous said...

How..er..handy! I'll clip and save it. That way, it will always be within arm's reach.

I wish you a speedy recovery!

Jim Anderson said...

Thanks, both. Also, anonymous, here's hoping you'll never have need.